您现在所在的位置:首页--(米亚基逆变直流焊接电源气缸加压)SDZ-300B型 换向器自动点焊机

(米亚基逆变直流焊接电源气缸加压)SDZ-300B型 换向器自动点焊机

上传时间:2019-06-04




SDZ-300B DC output Automatic Commutator Spot Welding Machine

 

本机是专为电机换向器与电枢绕组连接的一种专用焊接设备。采用进口PLC控制器和触摸屏显示器控制焊机动作,在单个焊点可分别设定压力,配置米亚基逆变焊机联合控制、可定电流、定功率、定电压等控制、多种焊接规范编号、多段通电方式。具有电流缓升、缓降功能。能通过各段焊接电流的合理选择来达到高质量的焊接,工件机械定位对槽,可设定角度补偿,配有内置冷却水箱,进口电磁阀控制焊接气缸,快速稳定,所有动作一次完成,操作简单,性能优越,焊接质量高。

 

The machine is designed for motor commutator and armature winding connection of a special welding equipment.The use of imported PLC controller and touch screen display control welding movements in a single solder joint can be set pressure, the configuration Miyaji inverter welding control, constant current, constant power, constant voltage control, a variety of welding specifications Number, multi-section power mode. With the current slow rise, slow down function. Can be selected by the reasonable choice of welding current to achieve high-quality welding, the workpiece mechanical positioning on the slot, can be set to the angle compensation, with built-in cooling water tank, import solenoid valve control welding cylinder, fast and stable, all actions once completed Simple, superior performance, high-quality welding.

技术参数/Technicai Parameters


电源电压Supply voltage AC380±10%  50Hz

气源压力Air pressure

0.5~0.7MPa

逆变器Rectifier(可选Optional)

IPB-5000   /   IS-300A

短路电流Short Circuit Current 5000A   /  10000A
可焊线径Wire diameter

Φ0.12~0.5mm/Φ0.5~1.2mm

转子直径Rotor Diameter

≤Φ90mm

轴径Shaft diameter

≤Φ17mm

换向器直径Commutator diameter

≤Φ40mm

扫一扫关注我们
Copyright © 2014 浙江巨龙自动化设备股份有限公司 All Rights Reserved 备案号:浙ICP备11012977号-1

浙公网安备 33102202000120号