BL-1型 波形绕线机
BL-1 Model Wave Shape Coil Winding Machine
本机适用于汽车发电机三相定子波形绕组的自动绕线和分相推入线爪的专用设备。采用国际先进的双滑轮双钢丝设计,钢丝使用寿命长,可绕线径粗,稳定可靠,采用PLC程控,彩色触摸屏设定参数,伺服电机绕线和排线,自动分相推入工装,自动剪断,自动调头、绕线成形后分相推入线爪,三相一次完成两只定子线圈,并有故障自诊断显示功能。
This machine is suitable for automatic winding of the three-phase stator wave windings of the automobile generator and automatic multi-times pushing coils to claw. Adopting international advanced double pulley double steel wire design, the steel wire has long service life. This machine is suitable and reliable for winding thick wire. It adopts PLC program control, color touch screen for setting parameters, servo motor for winding and arraying. It has functions of automatic multi-times pushing into tooling, automatic cutting, automatic turning, automatic winding and automatic pushing into the claws, and fault self-diagnosis display. It can complete of two three-phase stators coils at one time.
技术参数/Technicai Parameters
电源电压Supply voltage |
AC380V±10%50Hz |
气源压力Air pressure | 0.5~0.7MPa |
总功率Total power |
3kw |
绕线直径Wire diameter | ≤Φ1.7mm |
线径范围Wire Range | 0.5~3mm |
定子内径Stator ID |
Φ70~Φ150mm |
定子厚度Stator thickness |
5~100mm |
浙公网安备 33102202000120号